Table of Contents
Advertisement
Gi33 Backing Plate Installation
Backing Plate Installation
These instructions are for use with the following products:
Part #
Description
391-936
Backing Plate 3-Sided Oversized Black
391-937
Backing Plate Custom 3-Sided
391-938
Backing Plate Custom 4-Sided
1. Attach the brackets on both sides using the four screws provided,
ensuring they sit at the front of the slots.
2. Position the backing plate.
3. Fasten four screws on both sides to attach the backing plate.
920-688
?. Remove the four screws located at the front of the unit.
4. Remove the four screws at the front of the unit.
5. Position the faceplate. If installing a premium surround, refer to
"Premium Surround Installation".
6. Fasten the four screws on both sides to attach the faceplate.
7. Slightly loosen the screws shown below on both sides.
1
installation
Gi33 Direct Vent Gas Insert |
05.25.23
57
Advertisement
Table of Contents
