installation
Driftwood Log Set Installation (Part # 311-930/P)
12. Carefully lay Log 1 on the two pins behind the burner. Make sure the left part of the log does not hit the left portion of the burner.
Log 1
13. Place Log 2 behind the left portion of the burner, resting its right side in the notched area on Log 1. Rotate the front of Log 2 onto the metal
flange and ensure it is resting directly on the tray, with no embers underneath.
Log 2
14. Place Log 3 on the pin and rotate it until it touches the tab shown below. Ensure that Log 3 is resting directly on the tray with no embers
underneath.
Log 3
Tab
50
| Gi33 Direct Vent Gas Insert
4
920-621a
06.26.23