Display Settings; Scene Mode - HIKVISION DS-2DP8A440IXG-LEF/624(F0) User Manual

Note
The number of main stream encoder tracks of panoramic channel does not change after
●
target cropping. Go to Configuration → System → System Settings → Image Stitching to see
the number of encoder tracks.
All stream types of panoramic channel are unable to change resolution after enabling target
●
cropping.

6.7 Display Settings

It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings and select a device channel to start
configuration.
Synchronize Settings among Panoramic Channels
Enable Panoramic Exposure Synchronization to copy all display setting parameters of Camera 02
(the main panoramic channel) to Camera 03.
Note
When you turn off the function, the display settings of the panoramic channels do not return to
●
those before enabling the function.
The function is only supported by the models with two panoramic channels.
●
Restore Display Settings
Click Default to restore the display settings of the selected channel.
Note
For the models with two panoramic channels and the Panoramic Exposure Synchronization is on,
restoring Camera 02 settings also affects those in Camera 03. Simply restoring Camera 03 is not
allowed.

6.7.1 Scene Mode

There are several sets of image parameters predefined for different installation environments.
Select a scene according to the actual installation environment to speed up the display settings.
Image Adjustment
By adjusting the Brightness, Saturation, Contrast and Sharpness, the image can be best displayed.
Stitched PanoVu Camera with PTZ User Manual
39