Table of Contents
Advertisement
6. Optional: Set the minimum size and the maximum size for the target to improve detection
accuracy. Only targets whose size are between the maximum size and the minimum size trigger
the detection.
1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the
button and draw again.
2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the
button and draw again.
7. Set detection parameters.
Sensitivity The value of the sensitivity defines the size of the object which can trigger the
alarm, when the sensitivity is high, a very small object can trigger the alarm.
Threshold
It stands for the time of the objects left in the area. Alarm is triggered after the
object is left and stays in the area for the set time period.
8. Click Save.
9. Repeat above steps to set other regions.
10. Set arming schedule. See Set Arming Schedule .
11. Set linkage method. See Linkage Method Settings .
8.2.7 Set Tracking Parameters
Adjust the motion parameters of the device for better target tracking performance.
Steps
1. Go to VCA → Smart Event → Advanced .
Stitched PanoVu Camera with PTZ User Manual
Figure 8-9 Draw Area
69
Advertisement
Table of Contents
