Table of Contents
Advertisement
3. Set Park Time: the inactive time before the device starts park action.
4. Select Action Type according to your needs.
5. Select an Action Type ID, if you select patrol or preset as action type.
When the action type is patrol, action type ID stands for patrol No. When the action type is
preset, action type ID stands for preset No.
6. Click Save.
4.8.1 Set One-Touch Park
This function is used to start park instantly.
Steps
1. Refer to Set Park Action to set a park action.
2. Choose from the following methods to start one-touch park.
- Click
.
- Call Preset No. 32.
4.9 Set Privacy Mask
Privacy masks cover certain areas on the live image to protect personal privacy from being live
viewed and recorded.
Steps
1. Go to Configuration → PTZ → Privacy Mask .
2. Select the PTZ channel.
1) Check Enable Privacy Masks.
2) Adjust the live image to the target scene via PTZ control buttons.
3) Draw the area.
Draw Area
Stop Drawing
4) Click Add.
It is listed in Privacy Mask List.
5) Edit Name, Type, and Active Zoom Ratio on your demand.
Active Zoom Ratio
When the actual zoom ratio is less than the set active zoom ratio, the set area can not be
covered. When the actual zoom ratio is greater than the set active zoom ratio, the privacy
mask is valid. The maximum value of active zoom ratio depends on the camera module.
6) Click Save.
Stitched PanoVu Camera with PTZ User Manual
Click Draw Area and drag the mouse in live
view image. You can drag the corners of the
red rectangle to adjust the area.
Click Stop Drawing after drawing area.
21
Advertisement
Table of Contents
