Steps
1. Click
to enable the function.
2. Select a target area in live image.
- Left click on a point on live image: the point is relocated to the center of the live image. With
no zooming in or out effect.
- Hold and drag the mouse to a lower right position to frame an area on the live: the framed
area is zoomed in and relocated to the center of the live image.
- Hold and drag the mouse to an upper left position to frame an area on the live: the framed
area is zoomed out and relocated to the center of the live image.
3. Click the button again to turn off the function.
5.1.10 Display PTZ Range on Panorama
The view of PTZ channel is marked on the panoramic channel with a rectangle. It helps to locate
the PTZ channel in the whole scene.
Go to Configuration → System → Maintenance → System Service to turn on or off the function.
5.1.11 OSD Menu
When network access is unavailable, you can call the Preset No.95 to show OSD menu to start
device configuration.
Click direction buttons or
Click
to confirm your selection.
5.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network conditions. In different
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1. Go to Configuration → Local .
2. Set the transmission parameters as required.
Protocol
TCP
TCP ensures complete delivery of streaming data and better video quality, yet the real-time
transmission will be affected. It is suitable for the stable network environment.
UDP
UDP is suitable for the unstable network environment that does not demand high video
fluency.
Stitched PanoVu Camera with PTZ User Manual
and
to move up and down.
29