Table of Contents
Advertisement
Select file system protocol according to the operation system.
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is
selected.
3. Click Test to check whether the network disk is available.
4. Click Save.
7.1.4 Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The platform requests picture
directly from the cloud for picture and analysis. The function is only supported by certain models.
Steps
Caution
If the cloud storage is enabled, the pictures are stored in the cloud video manager firstly.
1. Go to Configuration → Storage → Storage Management → Cloud Storage .
2. Check Enable Cloud Storage.
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
AccessKey
SecretKey
User Name and
Password
Picture Storage
Pool ID
4. Click Test to test the configured settings.
5. Click Save.
7.1.5 eMMC Protection
It is to automatically stop the use of eMMC as a storage media when its health status is poor.
Note
The eMMC protection is only supported by certain device models with an eMMC hardware.
Go to Configuration → System → Maintenance → System Service for the settings.
Stitched PanoVu Camera with PTZ User Manual
The protocol version of the cloud video manager.
The IP address of the cloud video manager. It supports IPv4 address.
The port of the cloud video manager. You are recommended to use the
default port.
The key to log in to the cloud video manager.
The key to encrypt the data stored in the cloud video manager.
The user name and password of the cloud video manager.
The ID of the picture storage region in the cloud video manager. Make
sure storage pool ID and the storage region ID are the same.
51
Advertisement
Table of Contents
