Kongsberg EA 600 Instruction Manual page 92

EA 600 / Base version
Note
82
C1229 / C1234 - Synchronization of GPT 1 and
GPT 2
This cable is used to connect the GPT to an external system for
synchronization purposes. The cable must be provided by the
shipyard.
→
Cable details, page 123.
C1230 - Motion sensor (input)
This cable is used to connect the GPT to an external motion
sensor. The cable must be provided by the shipyard.
→
Cable details, page 124.
C1231 - Temperature sensor (input)
This cable is used to connect the GPT to an external temperature
sensor. The cable must be provided by the shipyard.
→
Cable details, page 124.
C1233 - Transducer(s)
The transducer cable is fixed to the transducer. If the distance
between the transducer and the transceiver exceeds the length of
the transducer cable, a 1:1 junction box must be used. The
standard transducer cable supplied is 15 to 20 meters long.
The transducer cable between the transducer element and the
junction box or GPT must be run in steel conduits. Use flexible
conduit close to the plug on the transceiver.
→
Cable details, page 126.
857-164688 / E