Related Manuals for Kongsberg EA440SP
Summary of Contents for Kongsberg EA440SP
- Page 1 EA440SP Splashproof Single beam hydrographic echo sounder Quick installation guide 418799/A October 2016 © Kongsberg Maritime AS...
- Page 2 Kongsberg Maritime AS. Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly stated, but does not accept liability for any errors or omissions.
-
Page 3: Table Of Contents
Connecting one or more transducers to the EA440SP............8 Connecting power and ground to the EA440SP ..............9 Connecting the Ethernet cable from the EA440SP to the computer........10 EA440SP Channel 1 and 2 transducer cable..............11 EA440SP Channel 3 transducer cable ................12 EA440SP Channel 4 transducer cable ................12... - Page 4 EA440SP Splashproof 418799/A...
-
Page 5: Cable Layout And Interconnections
Connecting one or more transducers to the EA440SP, page 8 Connecting power and ground to the EA440SP, page 9 Connecting the Ethernet cable from the EA440SP to the computer, page 10 EA440SP Channel 1 and 2 transducer cable, page 11... -
Page 6: Cable Plan
EA440SP Splashproof Cable plan The cables are part of the delivery with the main units. CD020301_010_003 Computer Suitcase Transducer 418799/A... -
Page 7: List Of Ea440Sp Cables
Cable layout and interconnections List of EA440SP cables A set of cables is required to connect the EA440SP units to each other, to the relevant power source(s), and to peripheral devices. Cable Signal From / To Min. requirements Suitcase / Transducer... -
Page 8: Connecting One Or More Transducers To The Ea440Sp
EA440SP Splashproof Connecting one or more transducers to the EA440SP Depending on your operational requirements for the EA440SP, one or more transducers must be connected to the Suitcase. Context The transducer is connected to a 7–pin connector on the rear of the suitcase. The connectors are part of the EA440SP delivery. -
Page 9: Connecting Power And Ground To The Ea440Sp
The Suitcase must be connected to a suitable power source and must be properly grounded. Context The EA440SP must be powered by a separate power supply or battery. A connector with crocodile clips for easy connection to a battery is provided. 418799/A... -
Page 10: Connecting The Ethernet Cable From The Ea440Sp To The Computer
Procedure Connect the DC cable from the power supply to the +12 Vdc socket. Connect the provided grounding cable from the nearest grounding point to the dedicated terminal on the EA440SP. Further requirements : 12 to 15 VDC, 5A. Voltage requirement... -
Page 11: Ea440Sp Channel 1 And 2 Transducer Cable
The socket is located on the bottom of the suitcase. The socket is made to fit an Amphenol Ecomate 6-pin connector. The connector is part of the delivery. Minimum cable requirements Not applicable. If you need an extension cable, contact your dealer (or Kongsberg Maritime) for support. 418799/A... -
Page 12: Ea440Sp Channel 3 Transducer Cable
The socket is located on the bottom of the suitcase. The socket is made to fit an Amphenol Ecomate 6-pin connector. The connector is part of the delivery. Minimum cable requirements Not applicable. If you need an extension cable, contact your dealer (or Kongsberg Maritime) for support. EA440SP Channel 4 transducer cable Once the transducer cable has been installed, you can connect it to the Suitcase using the plug provided. - Page 13 The socket is located on the bottom of the suitcase. The socket is made to fit an Amphenol Ecomate 6-pin connector. The connector is part of the delivery. Minimum cable requirements Not applicable. If you need an extension cable, contact your dealer (or Kongsberg Maritime) for support. 418799/A...
- Page 14 ©2016 Kongsberg Maritime...
Need help?
Do you have a question about the EA440SP and is the answer not in the manual?
Questions and answers