Kongsberg EA 600 Instruction Manual page 82

EA 600 / Base version
72
→
Cable details, page 117.
C1003 - Mouse (or other pointing device)
This is a standard computer cable. It is supplied with the mouse.
→
Cable details, page 118.
C1004 - Printer (Parallel Centronics)
This is a standard computer cable. It is supplied with the printer.
Note that this is an optional item.
→
Cable details, page 119.
C1006 - Ship's ground
This is a single core ground cable. It must be supplied by the
installation shipyard.
→
Cable details, page 112.
C1007 / C1017 - Ethernet
The computer is normally equipped with one Ethernet plug, and
only C1017 is then supported. The communication between the
computer and the General Purpose Transceiver (GPT).EA 600
can then be connected through a switch.
However, an additional Ethernet board may be installed. With
both C1007 and C1017 available, one Ethernet line is used to
communicate directly with the GPT, while the other connects
the EA 600 to the computer. Both cables are terminated with
RJ45 plugs, and can be supplied by the installation shipyard.
If a single Ethernet cable is used between the computer and the
General Purpose Transceiver (GPT) unit, this must be twisted
("cross-over" connection). If an Ethernet hub is implemented,
straight cables are used.
→
Cable details, page 114.
C1008 / C1009 - AC power
This is a standard AC mains cable. The cable is supplied by
Kongsberg Maritime.
→
Cable details, page 111.
C1010 / C1011 / C1012 / C1013 - Serial lines
The number of serial lines available depends on the computer
make and model. Standard RS-232 serial lines with 9-pin
D-connectors are default.
C1014 - Serial lines
If required for special interface requirements, the computer may
have an optional interface board installed to allow for additional
serial lines.
857-164688 / E