Table of Contents
Advertisement
EA 600 / Base version
Transducer connector
AN
B
C
D
E
FH
80
Connectors
The following connectors are located on the rear side of the
General Purpose Transceiver (GPT) unit.
Network
connector
M
15
L
K
J
9
SIMRAD
GPT
RJ45 ethernet connector
Figure 31 GPT connectors
C1007 / C1017 / C1207 / C1307 - Ethernet
This is a standard RJ45 terminated Ethernet cable. The
communication between the computer and the General Purpose
Transceiver (GPT) can then be made directly, or via the ship's
network.
If only a single Ethernet cable is used between the operating
station and the General Purpose Transceiver (GPT) unit, this
must be twisted ("cross-over" connection). If an Ethernet Hub
or a switch is implemented, straight cables are used.
→
Cable details, page 114.
C1220 - AC Power to GPT
This is a standard AC mains cable. The cable is supplied by
Kongsberg Maritime.
→
Cable details, page 111.
Auxiliary
connector
13
25
8
14
1
1
10A Fuse
+12 Vdc
sockets
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
Fused AC input
857-164688 / E
Advertisement
Table of Contents
