Table of Contents
Advertisement
857-164688 / E
C1004 - Printer (Parallel Centronics)
This is a standard computer cable. It is supplied with the printer.
Note thast this is an optional item.
→
Cable details, page 119.
C1005 - Not used
This cable is not implemented.
C1006 - Ship's ground
This is a single core ground cable. It must be supplied by the
installation shipyard.
→
Cable details, page 112.
C1007 / C1017 - Ethernet
The computer is normally equipped with two Ethernet interface
connectors. The communication between the operator station
and the general Purpose Transceiver (GPT) is normally
connected directly (recommended) and LAN* connector is used,
C1017.
With both C1007 and C1017 available, one Ethernet line is used
to communicate directly with the GPT, while the other connects
the echo sounder to the ship's Ethernet network GLAN. Both
cables are terminated with RJ45 plugs, and both must be
supplied by the installation shipyard. One short LAN cable is
supplied by Kongsberg Maritime for connection computer and
GPT.
Failure to use separate network adapters will cause a heavy
traffic load on the common network. This may inhibit normal
traffic on this network, and degrade the operational capabilities
of the EA 600 system.
If a single Ethernet cable is used between the Operator Station
and the General Purpose Transceiver (GPT) unit, this must be
twisted ("cross-over" connection). If an Ethernet hub or a switch
is implemented, straight cables are used.
→
Cable details, page 114.
C1008 - AC power
This is a standard AC mains cable. The cable is supplied by
Kongsberg Maritime.
→
Cable details, page 111.
Cable layout
75
Advertisement
Table of Contents
