Table of Contents
Advertisement
Cable layout
C1015 / C1016 - USB
These are two standard USB cables. Both are optional, and the
cables are supplied by Kongsberg Maritime when applicable.
→
Cable details, page 116.
Note that commercial "RS-232 to USB" converters may also be
put to use if the number of available serial lines is too small.
C1028 - Remote control
Refer to the General Purpose Transceiver (GPT) cables.
Connectors
All connectors are normally located on the rear side of the
computer unit. The physical location of these will depend on the
actual computer model chosen for the installation.
73
857-164688 / E
Advertisement
Table of Contents
