Starting The Scsi Configuration Utility; Main Menu - HP Kayak XA-s 02xx Manual

NOTE

Starting the SCSI Configuration Utility

You access the SCSI Configuration Utility by pressing
message
Press F6 to start Configuration Utility...
displayed during the PC Workstation's start-up routine. A further
message is then displayed:
before the Main menu of the Symbios Logic SCSI
Utility...
Configuration utility appears.

Main Menu

The items shown on your screen may be different from those shown
below.
Symbios Logic SCSI Configuration Utility
MAIN MENU
.SYM53C875
Change Adapter Status.
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Verbose.
Mono/Color.
Language
Help.
Quit.
Use arrow keys to select from menu. Then press ENTER
1. Only used if more than one Symbios card is installed.
2. Not available (English only).
Use the and
from this menu.
You can only select an adapter if the current status is "On". Changes
are possible only if NVRAM (non-volatile memory on your adapter) is
present.
HP Kayak XA-s 02xx PC Workstation - Configuring a SCSI Accessory
Using the SCSI Configuration Utility (Selected Models)
Please wait, invoking Configuration
Version 1.07
Port Irq ------Status------
Num Level Current
E800 3 On
1
.
2
.
BIOS Code Segment: C800
keys and the
when the
NvRAM
Next-Boot Found
On Yes
1
.
key to make a selection
is
English
3