Command By Sub Program; Command By Main Program - Brother TC-32B Manual

Chapter10 Subprogram function
10.3 Return No. Designation from Program
Command format
10.3.1
(Program execution sequence )
When the command is executed, the program returns the commanded sequence No.of the
parent program. The sequence No is serched from the top of the program,and the program
returns to the block initially found.
An alarm will occur when the commanded sequence No.is not present.
(Note)
10.3.2
When the command is executed the program to the sequence No. commanded within the main
program. The sequence No.is searched from the top of the program ,and the program jump to the
10
block initially found.
An alarm will occur when the commanded sequence No. is not present.
(Program execution sequence )
2004/01/16
M99 P_ ;

Command by sub program

M98 P_ ;
N0001 ;
An alarm will occur unless the number of repeats commanded by M98
is "1".

Command by main program

N0001 ;
M99 P0001 ;
10 - 4
G01 Z_ ;
M99 P0001 ;
eNCPR11.03.ai
eNCPR11.04.ai
eTCOMNCPR10-1.doc
TC-32B