Brother TC-32B Manual page 193

TC-32B
Measurment pattern
1. The spindle is oriented. The probe moves to the first measurement start point of the X and
Y axes.
2. The probe moves to the Z axis measurement height.
3. The first measurement is carried out (Position "J").
4. Measured by position "L" when "L" is commanded
5. The probe moves to the Z axis return point.
6. The spindle is oriented. The probe moves to the second measurement start point of the X
and Y axes.
7. The probe moves to the Z axis measurement height.
8. The second measurement is carried out.
9. Measured by position "K" when "K" is commanded
10. The probe moves to the Z axis return point.
I and J symbols, spindle orientation, and direction of the measuring skip movement.
a) I>0, J>0
1ST
J
b) I>0, J<0
J
1ST
c) I>0, J<0
2004/01/30
Chapter 8 Automatic work measurement
I
1ST ... spindle 0° , in the +X directi
2ND
2ND... spindle0° , in the +Y directi
2ND
I
1ST ... spindle 0° , in the +X directio
2ND ... spindle 180° , in the -Y directi
J
I
1ST ... spindle180°, in the -X directi
2ND
2ND... spindle 0°, in the +Y directio
8 - 11
+Y
+X
+Y
+X
+Y
1ST
+X
eNCPR9.11.ai
8
eNCPR9.12.ai
eNCPR9.13.ai
eTCOMNCPR8-1.doc