Skip The Auto.bas Program - Brother TJ-4420TN User Manual

6.1.6 Skip the AUTO.BAS Program

You can upload the AUTO.BAS program to the printer's flash memory so that it runs
automatically at startup, but if you do not want it to run automatically, follow these steps:
1. Turn off the printer.
Press and hold the right Selection button, and then turn on the Power Switch.
2.
3. Release the button when READY (Skip AUTO.BAS) appears on the screen.
Note
The LED color will change in the following order:
Amber (lit)  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times) 
red/amber (5 times)  green (lit)
4. The printer will start without running the AUTO.BAS program.
60