Brother TC-32B Manual page 222

Chapter11 Feed function
11 Feed Function
Feedrate is specified by the number following address F.
(1) Command range
Metric system :
Inch system :
(2) Clamp
If the axis movement at a higher feedrate than the values specified by the machine parameter, an
alarm is generated.
11
2004/01/22
1~999999 mm/min
1~999999゜/min
0.1~99999.9 inch/min
0.1~99999.9゜/min
11 - 2
TC-32B
eTCOMNCPR11-1.doc