Chapter 3 Preparation Function
3.10
Soft Limit
The allowable area of the tool motions can be specified in the following three ways.
3.10.1
The maximum machine stroke is set by the parameter 2.
This should not be changed by the user
3
(Note) Z origin is set by the machine parameter.
3.10.2
The allowable area of the tool motions in each axis of the X, Y and Z is set by the user parameter.
2004/01/22
(1) Stroke setting by the parameter 2
(2) Stroke limit setting by the parameter 1
(3) Programmable stroke limit setting by the G22 code
Stroke
Y axis
stroke
Z axis
stroke
-X
X axis stroke
Stroke limit
Axes working area
-Y
3 - 34
TC-32B
+Z
Z origin
(Zero point return
position)
Machine zero poi
(0,0,0)
eNCPR3.17.ai
eTCOMNCPR3.doc