Brother TC-32B Manual page 187

TC-32B
Item
MEASURING MOTION
(0:TYPE1 1:TYPE2)
2004/01/30
(0:TYPE1)
1) It is checked that the detection signal is off.
2) The probe moves in the specified axis direction at the speed preset to
MEASURING SPEED 1.
3) When the detection signal has turned on, the axis stops traveling.
4) The probe moves forward for the RETURN DISTANCE AFT MEASURNG.
5) The probe moves in the specified axis direction at the speed preset to
MEASURING SPEED 2.
6) When the detection signal has turned on, the axis stopstraveling.
7) The probe returns to the position of 4).
8) It is checked that the detection signal is off.
(1:TYPE2)
1) It is checked that the detection signal is off.
2) The probe moves in the specified axis direction at
the speed preset to MEASURERING SPEED 2.
3) When the detection signal has turned on, the axis raveling.
4) The probe moves forward for the RETURN DISTANCE AFT MEASURNG.
5) It is checked that the detection signal is off.
8 - 5
Chapter 8 Automatic work measurement
Description
eNCPR9.09.ai
8
eNCPR9.10.ai
eTCOMNCPR8-1.doc