Page 1
U s e r M a n u a l 020-001162-0 GS Series DHD599-GS/DWU599-GS...
Page 2
The CD included with this printed manual contains an electronic copy in English. Please read all instructions before using or servicing this product. Le DC fourni avec ce manuel imprimé contient une copie électronique en français. S'il vous plaît lire toutes les instructions avant d'utiliser ou de réparer ce produit.
Page 3
Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Page 4
Preventive maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as required, and in accordance with the maintenance schedule specified by Christie, will void the warranty.
• When you turn the projector off, wait 180 seconds for the projector to cool down before you disconnect the projector from power. • All installation and maintenance procedures must be performed by a Christie accredited service technician. • Keep all combustible material away from the concentrated light beam of the projector.
CLASS 3R 440-455nm 122 mW 440-455nm 122 m 2.2 ms 2.2ms Laser aperture warning: Laser aperture warning label is located on top of the projector as shown in the illustration below. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 10
• Do not stare into beam when the projector is on. The bright light may result in permanent eye damage. • Follow the control, adjustment or operation procedures to avoid damage or injury from exposure of laser radiation. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Lens ring Protects the lens motors and mechanism. Remove in order to insert or remove the lens. Adjustable feet Raises or lowers the feet to level the projector. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Connects the projector to external devices. AC input Connects to the supplied power adapter (100-240V~). Power button Powers the projector on or off. Kensington lock Secures the projector to counter tops, tables, and so on. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Displays the status of the projector. They are (from left to right): LASER, STATUS, and PIC MUTE. Built-in keypad Controls the projector. Cooling air vents Provides cooling to the projector. Keep these vents unobstructed to prevent (exhaust) the projector from overheating. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Returns to the previous level or exits the menus if at top level. Input Selects an input for the main or PIP/PBP image. Picture mute Displays or blanks the video image. Zoom Adjusts the zoom. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
S-VIDEO Connector name Connector name HDBaseT COMPONENT IN (YPbPr) REMOTE IN RS232 REMOTE OUT MINI USB HDMI IN VGA IN ETHERNET VGA OUT CVBS DISPLAY PORT IN S-VIDEO DVI IN GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Displays or blanks the video image. Power on Turns the projector on. Gamma Adjusts the mid-range levels. Bright Adjusts the amount of light in the image. PIP/PBP Turns PIP/PBP on or off. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 17
Selects an input for the main or PIP/PBP image. Info Displays the source image information. Lens H Adjusts the position of the image horizontally. Lens V Adjusts the position of the image vertically. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Identify the picture mute LED state colors and meaning. LED Status Projector State Green (solid) Light is on and an image is displayed. Orange (solid) Light is on and the image is blank. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
• Due to the difference in applications for each country, the accessories required in some regions may differ from those shown. • This diagram is for illustrative purposes only, and does not indicate that these accessories are supplied with the projector. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
• Due to the difference in applications for each country, the accessories required in some regions may differ from those shown. • This diagram is for illustrative purposes only, and does not indicate that these accessories are supplied with the projector. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
The projector detects the source you selected and displays the image. Power on Power on Input Key The first time the projector is used, select the preferred language from the Main Menu after the startup screen is displayed. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Lens 0.95~1.22 (WU/HD) • Lens 1.52~2.89 (WU/HD) • Lens 0.75~0.95 (WU/HD) • Lens 2.90~5.50 (WU/HD) • Do not roll the projector more than 20 degrees from side to side. 20° 20° GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Warning! In portrait orientation, the Portrait Side Cover must be installed on the side of the projector which is now the lower side. Portrait orientation is not allowed with the opposite side facing down. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Warning! The projector should not be operated in Non-Portrait Mode. Portrait cover installation 1. Attach the Portrait cover to the left side of the projector and secure with six M3 screws. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
At +100% offset, all (or 100%) of the image will appear above the lens center. • The percentage (%) offset is calculated as the ratio of the number of pixels shifted up or down to half image size. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Installation WUXGA projectors The following show vertical and horizontal image offsets for the WUXGA projectors: • Vertical image offset: 0% Lens center • Vertical image offset: +100% Lens center GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 27
Installation • Vertical image offset: -100% Lens center • Horizontal image offset: +/-30% -30% +30% GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Installation HD Projectors The following show vertical and horizontal image offset for HD projectors: • Vertical image offset: 0% Lens center • Vertical image offset: +120% Lens center GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 29
Installation • Vertical image offset: -120% Lens center • Horizontal image offset: +/-30% -30% +30% GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Remove the lens through the front of the projector. 5. Install the new lens: Fully insert the lens assembly straight into the lens mount without turning. Rotate the lens cap clockwise to lock the lens in place. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Hold and Press Here Installing the ceiling mount Mount the projector with a Christie-approved mount (such as the Christie One Mount, P/N: 108-506102-XX), using the four mounting points on the underside of the projector. 1. Refer to the installation instructions and safety guidelines provided in the kit (such as the Christie One Mount, P/N: 108-506102-XX).
Installation Rotating the Christie badge The Christie magnetic badge on the front panel of the projector can be rotated for inverted installation. 1. Push on the edge of the badge to release it from its slot on the front panel.
To return to the previous menu or exit menus if at top level, press EXIT. Main Menu 1. Size & Position 2. Image Settings 3. Configuration 4. Light Source 5. Status 6. Input Switching & PIP 7. Language English 8. Test Pattern GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Proper pixel tracking ensures that the image quality is consistent across the screen, the aspect ratio is maintained, and that the pixel phase can be optimized. (Analog RGB signals only.) GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 35
• Wide mode—Supports all of the 16:9 input source and most of the 4:3 input source. For the 4:3 input sources not recognized by Wide mode (for example, 1400 x 1050), perform Auto Image using Normal mode. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
This is intended when for use with horizontally on-axis applications. For horizontally offset images, you must use 4-Corner correction using the optional Dual Processor Warp Module. Ind. 1080P WUXGA 4.40% 3.41% 8.93% 5.46% GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 37
4-Corner Allow the image to be squeezed to fit an area defined by moving each of the four corners’ x and y position. Ind. 1080P WUXGA 7.30% 7.30% 7.40% 6.70% GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 38
The function will not automatically scale the image down to prevent cropping. If scaling is required, the digital zoom function can be used, independently of the rotation function. Ind. 1080P WUXGA ±7.9° ±7.9° GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
• Video Black Level—Analyzes the current input image and calculate an offset value which is then added to the analog to digital converter black level value. This ensures optimum black level for each analog source. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 40
• White Peaking • Overscan • Brightness • Contrast • Color • Tint • Red Gain • Green Gain • Blue Gain • Red Offset • Green Offset • Blue Offset GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 41
• Color Enhancement—The Color Enhancement control can improve the picture quality of pictures with a high saturation of color. • Christie RealBlack—Allows displaying black with a high contrast ratio 750,000:1. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
• Lens Center Calibration—Calibrates the lens center. Ceiling Mount Turns the image upside down — for ceiling-mounted projection. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 43
• Off—Disables high altitude mode. For altitudes below 2000 IR Control Enable or disable IR control. — LED Indicator Enable or disable displaying — status LED and keypad LED. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 44
Adjusts blend widths and — settings to left, right, top and/or bottom sides to create a seamless multi-projector stitched image. For more information on color matching, see Image blending on page 47. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 45
ENTER. Choose a function that does not already have a dedicated button, and assign the hot key to that function, allowing you to quickly and easily use the chosen function. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 46
Record. To revert to original timing table settings, manually clear each setting. Factory Defaults do not clear these override settings. • Laser Diode Info—Displays the current laser banks status and temperature information. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Proj. 2,2 Proj. 2,1 Proj. 2,2 Blending regions can be defined on all sides – left, right, top and bottom. The same gamma curve is used for all blending regions. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
A negative hue input provides a clockwise rotation of the color's hue. • A positive hue input provides a counter-clockwise rotation of the color's hue. • A zero input does not change the hue of the color. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 49
A gain level of 254 sets the color region to have maximum gain; however, clipping occurs on the signal. • A gain of 127 is the nominal setting. • White provides three gain level controls, one each for the R,G,B component of white. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Calibration should be performed again after every laser diode change. Total Projector Displays the current total number of hours the — Hours projector has been used. Light Sensor Calibrates the light sensor. — GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
PIP/PBP Pixel Clock PIP/PBP Sync Type PIP/PBP Horz Refresh PIP/PBP Vert Refresh Light Source Power Total Projector Hours Standby Mode 0.5 W Mode Lens Lock Settings Allow IP Address DHCP System Temperature GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
PIP/PBP Pixel Clock PIP/PBP Sync Type PIP/PBP Horz Refresh PIP/PBP Vert Refresh Light Source Power Total Projector Hours Standby Mode 0.5 W Mode Lens Lock Settings Allow IP Address DHCP System Temperature GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Swapping is available only when PIP/PBP is enabled. Size Selects the PIP/PBP size to small, medium, or — large. Main Layout Sets the location of the PIP/PBP image on the — screen. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
A P indicates the primary source region (lighter color) and an asterisk (*) indicates both regions are the same size. PIP/PBP Size PIP/PBP Layout Small Medium Large PBP, Main Left PBP, Main Top PBP, Main Right PBP, Main Bottom PIP-Bottom Right PIP-Bottom Left PIP-Top Left GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Choose the required internal test pattern to display, or select Off to turn off a test pattern. Test Pattern 1. Off 2. Grid 3. White 4. Black 5. Checkerboard 6. Color Bars GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
2. From the Access type list, select the log in level. 3. In the Password field, type the password. 4. From the Language list, select the appropriate language. 5. To access the Main window, click Login. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Switches the on or off status of Power, Pic Mute, and on-screen display. Main tab–Status Displays the current status of light source, cooling (fans), version numbers and signal (source) information. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Operation Main tab–Lens Controls the focus, lens shift, and zoom adjustments for the lens. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
If you change a setting, the network subsystem of the projector may restart, and you may be logged off. Panel Description Restart Execute a network restart. This does not change any of the network settings. Network GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 60
Description Network Execute a network factory reset. Network settings may be reset to the following default values. Factory Reset Projector Name = Christie@ + Serial Number Show Network Messages = ON LAN settings: • Manual • IP Address = 192.168.0.100 •...
Page 61
• SNMP Trap Panel • + Email • Email • SNMP Trap • Disabled Crestron Enter the IP address, IP ID, and port of Crestron device for the connection. Control System Panel GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Use the Tools pages to control size & position, image settings, configuration, light source, input switching, PIP, and test patterns. Administrator Page Add or delete a user or change password. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
The About page provides version and license information about GS Series. Description Version Views the main firmware version, network firmware version, projector model name, and projector serial number. License Displays the license information of the computer program. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Operation Christie Presenter The Christie Presenter application allows a remote desktop from a host PC to be displayed on the network display through Ethernet or wireless transports. It can adapt to different network settings (DHCP, fixed IP, and direct link by Ethernet cable).
Install and configure the Christie Presenter software. 1. In a web browser, connect to the projector's network address. The default address is 192.168.1.100. 2. Download and install the Christie Presenter software. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 66
Operation 3. Configure the Christie Presenter software. The name entered identifies all computers connected to the projector by the Christie Presenter software—either wired or wireless connections. The Network Display Management > Device Management tab shows all current connections. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev.
Operation Using the Christie Presenter 1. To pause or play the USB display, in the system tray, press Autorun. After starting the Christie Presenter application, the main window appears. Icon Description Connects and searches the network display. Stops or starts displaying desktop contents to the connected network display.
The default password for the Normal user is left blank. If the password was previously set, it appears in the bottom-left corner of the on-screen display. The default password for the Admin user is admin. 5. In the Select display port window, select the display port. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Alterable Encloses only the captured region by the frame. To enlarge or downsize the region, drag the eight small black squares scattered on eight edges of the frame. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Operation Configuring Christie Presenter Set the language for Christie Presenter, the region size of fixed size capture mode, if a notification message dialog is allowed, the quality of JPEG images, YUV sample formats, and the network port setting. 1. To configure Christie Presenter for basic and advanced settings, click...
Presenter password can be changed. If user log in as Normal, the lock icon is displayed and the Presenter password cannot be changed. Disconnects from the target network display. Connects to a target network display using a web page. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
In this mode, the Card Reader application detects any USB flash devices hot-plug events and displays the flash device icon. When the flash device is removed from USB, the icon disappears. Christie recommends removing the USB flash devices only when the Card Reader is changed to the USB Flash Devices Detection Screen state.
Page 73
Display the image in a size that best fits the screen. EXIFDisp OFF/On Enables or disables the EXIF information display. +90deg Rotates the image 90 degrees. -90deg Rotates the image -90 degrees. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 74
Enables or disables Slide Show Repeat mode. When the image cannot be displayed due to a memory limitation or an unsupported image format, the specific image is displayed on the center of the screen. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
7. If the projector is still not projecting the entire image, change the monitor display: a. Verify the resolution setting is lower than or equal to WUXGA (1920 × 1200). b. Switch to the Monitor tab. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different method of reactivation. Resolution Refer to your computer manual for information on changing the method of reactivation. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
The image is stretched when displaying a 16:9 DVD title. Details When you play anamorphic DVD or 16:9 DVD, the projector shows the best image if the projector display mode is set to 16:9 in the on-screen display. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
The image is too small or too large. Resolution • Adjust the lens zoom to fit. • Verify you are using the correct lens. • Change the position of the projector. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Port MINI-B Matrix HDMI Component CVBS S-Video HDBaseT DisplayPort USB A USB MINI-B RJ45 DVI-D • Dot ( ): PIP/PBP combinations are enabled. • Dash (-): PIP/PBP combinations are disabled. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
A Web page via Ethernet or from a PC/device via a wireless USB dongle (optional) • Weight: • Maximum product weight (with lens removed): 16.5 kg (36 lbs.) • Built-In keypad GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Storage temperature range: -10°C to 60°C • Humidity range: 10% to 85% RH (maximum), non condensing • Storage humidity range: 5% to 90% RH (maximum), non condensing • Operating altitude: 10,000 ft maximum GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
It is essential that only the supplied power cord be used. • Use only shielded signal cables to connect I/O devices to this equipment. GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
(10 for GEO GEO model) model) Geometry 0 - 100 Correction Vert Keystone (0-20 for (10 for GEO Basic GEO model) model) Horz 0 - 100 Pincushion Vert Pincushion 0 - 100 GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 90
0 - 140 adjust. Bottom Right Vert 0 - 80 adjust. Top Arc 0 - 300 Bottom Arc 0 - 300 Curve Left Arc 0 - 300 Right Arc 0 - 300 GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 91
Maximum settings High Detail Normal By source set Minimum Color 0 - 100 Tint 0 - 100 Video Options Noise Reduction 0 - 100 Flesh Tone 0 - 100 Correction GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 92
Save to User Image Freeze Video Film Gamma Bright By source set Advanced Image DICOM Settings White Peaking 0 - 100 By source set Warmest Color Warm By source set Temperature Cool GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 93
Menu Vert Offset 0 - 100 Show Messages Menu 0 - 90 Transparency Menu Preferences Factory Logo Blue Splash Screen Factory Logo Setup Black White PIN Protect Command Change PIN Command GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 94
IR Control LED Indicator DHCP IP Address Subnet Mask By set Default Gateway MAC Address Communications Enable Start IP End IP WLAN By set Subnet Mask Default Gateway MAC Address GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 95
38400 57600 115200 1200 Configuration Serial Port Echo RS232 Serial Port Path RS232 HDBaseT Projector 0 - 9 Address Blending Marker White Image Blending Grid Green Blue Solid Color White GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 96
Red Part of Red 0-1000 1000 Green Part of 0-1000 Manual Color Matching Adjustment Blue Part of 0-1000 Green Part of 0-1000 1000 Green Red Part of 0-1000 Green Blue Part of 0-1000 Green GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 97
0 to 254 Gain HSG Adjustment Blue Saturation 0 to 254 Gain Cyan Saturation 0 to 254 Gain Magenta Saturation 0 to 254 Gain Yellow Saturation 0 to 254 Gain GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 98
Resolution Firmware Projector Info Configuration Boot Code Configuration Standby Mode Lens Lock Settings Wheel Index FactoryReset... Service Grid White Black Checkerboard Color Bars Test Pattern Green Blue Yellow Magenta Cyan GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 100
Format Status PIP/PBP Pixel Clock PIP/PBP Sync Type PIP/PBP Horz Refresh PIP/PBP Vert Refresh Light Source Power Total Projector Hours Standby Mode Lens Lock Settings IP Address DHCP System Temperature GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 101
Signal Format Aspect Ratio Resolution Vert Refresh Horz Refresh Source Info Pixel Clock Sync Type Color Space (When PIP/PBP PIP/PBP active) <PIP/PBP source (When PIP/PBP lines> active) Enable source Hot-Key GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)
Page 102
Mini USB Key number 0 HDBaseT Change Sources Input key List All Sources Auto Source Auto Source Blank on Signal Switch Language English Grid White Test pattern Black Checkerboard Color Bars GS Series (DHD599-GS, DWU599-GS) User Manual 020-001162-0 Rev. 1 (12-2017)