Camshaft - KYMCO X -Town 125 ABS Service Manual

6. CYLINDER HEAD/VALVES

CAMSHAFT

REMOVAL
Turn the A.C. generator flywheel so that the
"T" mark on the flywheel aligns with the
index mark on the crankcase.
Hold the round hole on the camshaft gear
facing up and the location is the top dead
center on the compression stroke.
Remove the tensioner sealing bolt and spring.
Remove the two bolts from cam chain
tensioner and then remove the tensioner and
gasket.
Remove the camshaft gear and bolt.
Remove the camshaft from the cylinder head
6-7
Tensioner Sealing Bolt
Camshaft
X -Town 125 ABS/ CBS
Round Hole