KYMCO X -Town 125 ABS Service Manual page 201

15.HANDLEBAR/FRONT WHEEL/FRONT BRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
Brake fluid draining
Make sure that the master cylinder parallel to
the ground, before removing the reservoir
cover.
Remove the two screws (1).
Remove the reservoir cover , diaphragm plate
and diaphragm .
Connect a bleed hose to the bleed valve.
To replace front brake fluid,connect a
bleed hose to the Master front brake
Tube bleed valve.
To replace rear brake fluid,connect a
bleed hose to the Secondary front
brake tube bleed valve,after it bleeds
out,connect a bleed hose to the rear
brake bleed valve,and drain the brake
fluid out.
Rear brake
Bleed valve
Secondary front brake
tube bleed valve
X -Town 125 ABS/ CBS
(1)
Master front brake
tube bleed valve
15-12