KYMCO X -Town 125 ABS Service Manual page 66

4
. LUBRICATION SYSTEM
DISASSEMBLY
Remove the screw and disassemble the oil
pump as shown.
Screw
ASSEMBLY
Install the outer rotor, inner rotor and pump
shaft into the pump body.
＊
Insert the pump shaft by aligning the flat
on the shaft with the flat in the inner
rotor. Install the dowel pin.
There is one punch mark on the surface of the
inner rotor and outer rotor.
The mark is upside.
4-5
Pump cover
Inner Rotor
Dowel pin
Outer Rotor
Pump shaft
Dowel pin
Inner Rotor Pump shaft
Outer rotor
X -Town 125 ABS/ CBS
Pump body
Pump body