KYMCO X -Town 125 ABS Service Manual page 144

12. COOLING SYSTEM
COOLANT REPLACEMENT
PREPARATION
● The effectiveness of coolant decreases
with the accumulation of rest or if there
is a change in the mixing proportion
during usage. Therefore, for best
performance change the coolant
regularly as specified in he maintenance
schedule.
● Mix only distilled, low mineral water
with the antifreeze.
Recommended mixture:
1:1 (Distilled water and antifreeze)
REPLACEMENT/AIR BLEEDING
Remove the front cover (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section
in the chapter 2).
＊
When filling the system or reserve tank
with coolant (checking the coolant
level), place the scooter in a vertical
position on a flat, level surface.
Remove the radiator cap (1).
Remove the drain bolt (2) and drain the
coolant from the system.
12-5
X -Town 125 ABS/ CBS
(1) (1)
(2)