Equipment; Installing From The Cd; Installing From The Web; Main Program Window - Analog Devices AD9858PCB Manual

EQUIPMENT

In order to install and use this software and evaluation board,
the user needs the following:
2 Power supplies
1 PC (Windows® 95 or higher), with one free parallel printer
port
1 Precision signal generator (to act as a stable clock source)
1 Spectrum analyzer for viewing the output waveform
Miscellaneous cables

MAIN PROGRAM WINDOW

INSTALLING FROM THE CD

1. Insert the CD-ROM into the CD drive.
2. On your desktop, open Windows Explorer.
3. Locate the setup.exe file.
4. Double-click the file and follow the instructions.

INSTALLING FROM THE WEB

1. From your browser, go to www.analog.com/dds.
2. Click the product selection guide link.
3. Click the AD9858 link, then click the design tools link.
4. Click the install evaluation software link and follow
the instructions that appear.
After starting the AD9858 evaluation software, the main
program window appears. At the top of the screen are the File,
PC I/O, View, and Help menus and the Load Setup, Save Setup,
Reset, I/O Config, and FUD buttons.
Figure 2. Main Program Window
Rev. 0 | Page 3 of 12
AD9858PCB