User manual
P/N 3-9008-513
3. Gently slide the rotor into the bearing shaft. Note the orientation of the rotor.
4. Install the downstream thrust washer from the shaft. Note that the slot faces the
5. Install the outlet diffuser cap and Belleville washers.
6. Install and tighten the castle nut into shaft.
Important
Handle the rotor with care. Improper handling of the rotor assembly may cause
distortion to the rotor blades thereby affecting meter performance.
Figure 9-40: Rotor installation
rotor.
Figure 9-41: Downstream thrust washer installation
Figure 9-42: Diffuser cap and Belleville washers installation
USER MANUAL
Planned maintenance
September 2020
75
www.Daniel.com