Table of Contents
Advertisement
Prepare the turbine meter for use
September 2020
4.2
Lifting requirements for personnel
WARNING
EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with
the turbine meter. Adhere to all safety standards and best practices for operating the
equipment.
Failure to comply may result in death or serious injury.
Best lifting practices
WARNING
LIFTING HAZARD
The lifting instructions are for installation and removal of the Daniel Liquid Turbine
Meter only and do not address lifting the turbine meter while it is attached or bolted to
piping.
Failure to comply with these instructions may result in death, serious injury, or
equipment damage.
4.2.1
Equipment required to lift the turbine meter
WARNING
CRUSHING HAZARD
During turbine meter installation or removal, always place the unit on a stable platform
or surface that supports its assembled weight.
Failure to comply could allow the turbine meter to roll, resulting in death, serious injury
or equipment damage.
Important
Prior to lifting the unit refer to
maintenance
The following instructions provide general guidelines using lifting slings only on the Daniel
turbine meter. Use appropriately rated lifting slings when lifting the turbine meter.
42
Minimum clearances for installation, operation and
for the assemble weight.
User manual
USER MANUAL
P/N 3-9008-513
www.Daniel.com
Daniel Series 1200 Liquid Turbine Meter
39
Advertisement
Table of Contents
