DANIEL 1200 Series User Manual page 62

Planned maintenance
SERIES 1200 LIQUID TURBINE METER
September 2020
5. Remove the downstream stator and rotor from the bolt.
6. Disassemble all the internals.
62
www.Daniel.com
72
Figure 9-7: Support fins removal
The rotor assembly includes the rotor, two stainless steel ball bearing assemblies
and a spacer between the ball races. The ball races are a loose fit in recesses on the
rotor hub and may fall out. Be careful not to lose any small parts.
Figure 9-8: Downstream stator and rotor removal
Figure 9-9: Internals disassembly
User manual
P/N 3-9008-513
Daniel Series 1200 Liquid Turbine Meter