Table of Contents
Advertisement
User manual
P/N 3-9008-513
9.3.1
Disassemble internal meter housing components - NPS
1
Procedure
1. Remove the C-clip at the inlet flange using pliers.
2. Remove the sleeve. You may need to GENTLY tap the internals from the
3. Carefully remove the upstream sleeve. This is one piece.
User manual
Figure 9-1: C-clip removal
downstream end using a soft punch to start the process.
Figure 9-2: Sleeve removal
Planned maintenance
USER MANUAL
September 2020
59
www.Daniel.com
69
Advertisement
Table of Contents
