Putting A Conference Call On Hold And Resuming A Call; Dropping Or Disconnecting The Last Participant From A Conference Call; Viewing The Details Of A Conference - Avaya J159 Instructions Manual

Putting a conference call on hold and resuming a call

About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key or Hold button during a conference call.
2. Do one of the following:
• Press Resume or Hold button.
• Select the call appearance to resume the conference call.
Dropping or Disconnecting the last participant from a
conference call
About this task
You can use this procedure to disconnect the last participant who joined the conference. You
cannot disconnect other participants after you disconnect the last participant. You can use this
method to disconnect a participant again after you add another participant.
Procedure
1. From the phone screen, select your active conference call.
You will see the More soft key.
2. Press More > Drop when the conference is active.
Result
The participant who was added last gets disconnected from the conference.
Related links
Adding a participant to no hold conference

Viewing the details of a conference

About this task
Use this procedure to view the details of the participants on a conference call.
If you cannot, it might be due to the server on which your extension is configured. Contact your
system administrator.
April 2020
Putting a conference call on hold and resuming a call
on page 81
Using Avaya J159 IP Phone SIP
Comments on this document? infodev@avaya.com
51