Putting A Conference Call On Hold And Resuming A Call; Viewing The Details Of A Conference - Avaya J169 Manual

5. Press one of the following:
• Join
• OK
The held call is added to the conference call.

Putting a conference call on hold and resuming a call

About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key during a conference call.
2. Do one of the following:
• Press Resume.
• Select the call appearance to resume the conference call.

Viewing the details of a conference

About this task
Use this procedure to view the details of the participants on a conference call.
If you cannot, it might be due to the server on which your extension is configured. Contact your
system administrator.
Procedure
1. On the Phone screen, select your active call.
2. Press Conference soft key.
3. Do one of the following:
• Dial the telephone number.
• Call the person from the Contacts list.
• Call the person from the Recents list.
4. When the person answers, press Join or OK to add the person to the existing call.
5. Press Add and repeat the steps to add another person to the conference.
February 2021 Using Avaya J169 and J179 SIP IP Phones in Avaya Aura
Comments on this document? infodev@avaya.com
Putting a conference call on hold and resuming a call
®
57