Opening The - ABB TRIO-5.8-TL-OUTD-S Product Manual

5 - Installation
O
pening the front cover
The front cover can be easily opened by sliding it over the two rails on
both inner sides of the inverter. The sequence to follow is shown below:
• Unscrew the 8 screws that secure the front cover
(step 1)
04
• Open the cover by pulling it toward you and then pushing it upwards on
both sides (steps 2 and 3).
At this stage, avoid misplacing the cover.
• Secure the cover open by pushing it forwards and then downwards
(steps 4 and 5)
At this point the front cover, which is open and locked, allows access to
connection areas placed inside the inverter.
2 3
1
PO W
ER
AL AR
M
GF I
ES C
UP
DO W
N
EN TE
R
4 5
- 46 -