Closing The - ABB TRIO-5.8-TL-OUTD-S Product Manual

C
losing the front cover
During the installation of the cover, the installation sequence must be respected as well as
the tightening torque of the 8 screws (set out in the paragraph on technical data) in order to
IP65
keep the IP level of the inverter unchanged
At the end of the stage of connecting and configuring the inverter and
before proceeding with the commissioning, the inverter's cover must be
closed.
• Close the cover following the first 4 steps set out in the diagram.
• Insert and screw in the 8 fixing screws.
• Tighten the screws respecting the sequence and the tightening torque.
1
3
At the end of the stage of installing the front cover, it is possible to pro-
ceed with the commissioning of the inverter.
- 66 -
2
8
1
PO WE
R
AL AR
M
GF I
ES C
UP
DO WN
4
3
5
5 - Installation
5
6
4
EN TE
R
2
7