Hazardous Areas And Operations; Environmental Conditions And Risks; Signs And Labels - ABB TRIO-5.8-TL-OUTD-S Product Manual

H
azardous areas and operations
E
nvironmental conditions and risks
The equipment is not equipped to operate in environments that have particular flammability
or explosive conditions.
S
igns and Labels
The labels attached to the equipment must absolutely NOT be removed, damaged, dirtied,
hidden, etc.
The equipment can be installed outdoors, but only in environmental
conditions that do not prevent its regular operation. These conditions are
reported on the thecnical data and on installation chapter.
ABB CANNOT be held responsible for disposal of the equipment: displays,
cables, batteries, accumulators, etc., and therefore the customer must
dispose of these substances, which are potentially harmful to the
environment, in accordance with the regulations in force in the country
of installation.
The same precautions should be adopted for dismantling the equipment.
The customer and/or installer must appropriately train operators or an-
yone who may come near the equipment, and highlight, if necessary
with notices or other means, the hazardous areas or operations at risk if
required: magnetic fields, hazardous voltages, high temperatures, possi-
bility of discharges, generic hazard, etc.
The labels must be cleaned regularly and kept visible at all times, that
is, they must NOT be hidden with objects and extraneous parts (rags,
boxes, equipment, etc.)
The technical data shown in this manual do not in any case replace those
shown on the labels attached to the equipment.
- 36 -
3 - Safety and accident prevention