Info Menu - ABB TRIO-5.8-TL-OUTD-S Product Manual

I
nfo Menu
Selecting INFO from the three main sub-menus gives access to:
1. Product ID
Displays the model code
2. Serial No
Displays the serial number and week and year of manufacture of the
equipment
3. Firmware
Displays the firmware version installed in the equipment and the "update
version" field required to request a second-level password for the Service
menu (along with the Serial Number and Week of Production).
4. Country Select.
Displays information on the grid standard set with the rotary switches.
• Actual value: Displays the grid standard set.
• New value: Allows you to select a new grid standard (by using the
UP and DOWN buttons), which will only become effective when the
equipment has been switched off and on again, or when the selection
has been confirmed in the Set new value submenu described below.
The grid standard can only be changed if the time allowed for doing so
(24 hours of operation) has not expired.
• Set new value: This allows you to confirm/set the new grid standard set
in the "New value" section of the previous menu.
• Residual time: Displays the time remaining in which it is still possible to
set a new grid standard. When the time expires, "Locked" will be displayed,
which indicates it is not possible to change the grid standard again.
Information
ENTER
Product ID
DOWN
Serial No
DOWN
Firmware
DOWN
Country Select.
- 92 -
7 - Operation
1
UP
2
UP
3
UP
4