Accessory Components (Installable On The Inverter); Wifi Logger Card" Accessory Card - ABB TRIO-5.8-TL-OUTD-S Product Manual

A
ccessory components (installable on the inverter)
The accessories can be bought separately and installed directly by a qualified technician or
by the installer.
For information on the installation, compatibility and use, refer to the relevant accessory com-
ponent documentation.
"

Wifi Logger Card" accessory card

Installation of the Wifi Logger Card makes it impossible to use the "ETHERNET expansion
board" accessory as both use the same connector on the inverter
For all inverter models accessory components are available that add
specific functions to the inverter.
The main characteristics of the accessory components are listed in the
following paragraphs.
The Wifi Logger Card is a useful accessory for adding a wireless com-
munication line (WiFi) for connecting the inverter with a WLAN local
network permitting data transmission to the Aurora Vision Plant Viewer/
Aurora Vision web portal for remote monitoring of the inverter/system
®
via an internet or mobile browser App (Aurora Vision Plant Viewer
The code to use when ordering the accessory is: VSN300 Wifi Logger Card
Aurora Vision
Plant Viewer
POW
ER ALAR
M
GFI
ESC
UP
DOW
N ENTE
R
WI-FI router
The accessory is made up of three components:
- Scheda WiFi
- Antenna
- Cable for connection between WiFi card and antenna
The Wifi Logger Card is installed in the inverter on the connector referred
to as SLOT 1 on communication and control card
27
The Wifi Logger Card is in turn connected with a wire ending in an adap-
ter to be installed in place of one of the service cable glands
outside of the inverter) with a connector on which to install the antenna.
- 18 -
2 - Characteristics
for Mobile
INTERNET
.
06
)
for Mobile
Aurora Vision ®
Aurora Vision Plant Viewer™
web platform
(on the
16