ABB TRIO-5.8-TL-OUTD-S Product Manual page 91

If DHCP is disabled, the Ethernet board IP address must be set manually ("IP Address" sec-
tion).
• Address IP: Sets the Ethernet board IP address
• Gateway: Sets the IP address of the gateway receiving data from the
monitored system.
• Netmask: Sets the Internet subnet mask.
• Primary DNS: Sets the Internet primary DNS.
• Secondary DNS: Sets the Internet secondary DNS.
• Portal IP add.: Sets the Aurora Vision portal IP address.
• AV Method: Enables/disables data transmission to the Aurora Vision
Plant Viewer/Aurora Vision
• Data to portal: Enables/disables data transmission to the ABB portal.
• Send events: Enables/disables the sending of events (error codes) to
the portal.
• Check Updates: Enables/disables checking for Ethernet expansion
board firmware updates.
• Data send time: Sets the time for the data transmission to the portal
(not available in the current product version). The default value is 900
seconds.
.
®
- 91 -
7 - Operation