Oil Check Valve - Suzuki DR-Z400S 2001 Service Manual

Install the driveshaft oil seal into the left crankcase slowly,
using the special tool.
09913-70210: Bearing installer set
GEARSHIFT SHAFT OIL SEAL
Remove the gearshift shaft oil seal from the left crankcase,
slowly using the special tool.
09913-50121: Oil seal remover
Replace the removed oil seal with a new one.
Install the gearshift shaft oil seal into the left crankcase slowly,
using the special tool.
09913-70210: Bearing installer set

OIL CHECK VALVE

Remove the bushing 1, oil check valve ball 2 and spring 3
from the right crankcase cover.
Install the spring 3, oil check valve ball 2 and bushing 1 to
the right crankcase as shown.
The rubber part of bushing 1 must face to the outside.
ENGINE
3
2
1
1
2
3-47
3