Using The Multi Circuit Tester - Suzuki DR-Z400S 2001 Service Manual

7-4 ELECTRICAL SYSTEM

USING THE MULTI CIRCUIT TESTER

Properly use the multi circuit tester + and - probes. Improper
use can cause damage to the motorcycle and tester.
If the voltage and current values are not known, begin mea-
suring in the highest range.
When measuring the resistance, make sure that no voltage is
applied. If voltage is applied, the tester will be damaged.
After using the tester, be sure to turn the switch to the "OFF"
position.
Before using the multi circuit tester, be sure to read its
instruction manual.