Securing Cables - Siemens SIMATIC ET 200SP Operating Instructions Manual

Ethernet
You can use the integrated Ethernet interface X2 PN/IE(LAN) (10/100/1000 Mbps) for
communication and data exchange with automation devices, for example, SIMATIC S7.
Only ASCII characters are permitted in the name of the X2 PN/IE(LAN) interface in the TIA Portal,
e.g. PROFINET_2.
You need suitable software to do this: STEP 7, WinCC, SIMATIC NET.
Note
Use a Category 5e Ethernet cable (Cat-5e cable) for operation with 1000 Mbps.
PROFINET
PROFINET operation is possible via the X1 PN(LAN) interface and the approved BusAdapter.
PROFIBUS
The connection to PROFIBUS can be made using the DP master module.
7.5

Securing cables

The strain relief for connecting cables prevents the USB cables and PROFINET connectors
detaching from the CPU 1515SP PC2. The strain relief is included in the scope of delivery.
Flying sparks due to loose cables
Risk of explosion in hazardous areas.
USB cables and PROFINET connectors may detach from the device in the case of strong
oscillation and high vibrating loads.
Attach these cables to the strain relief of the device using cable ties.
Requirements
• The strain relief is fixed to the CPU.
• The CPU is installed.
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
WARNING
Wiring
7.5 Securing cables
45