Siemens SIMATIC ET 200SP Operating Instructions Manual page 82

Technical specifications
13.1 Standards and approvals
Explosion hazard
If you replace components, compliance with Class I, DIV. 2 can become invalid.
Area of application
This device is only suitable for use in Class I, Div. 2, Group A, B, C, D, or in non-hazardous areas.
CE marking
The CPU 1515SP PC2 meets the requirements and safety objectives of the following
guidelines and complies with the harmonized European standards (EN) for programmable
logic controllers published in the official journals of the European Community:
• 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
• 2014/34/EU "Equipment and protective systems intended for use in potentially explosive
atmospheres" (Explosion Protection Directive)
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
• 2006/42/EC "Machinery Directive" for fail-safe modules
The conformity declaration certificates are available for the responsible authorities and are
kept at the following address:
Siemens AG
Digital Factory
Factory Automation
DF FA TI COS TT
Postfach 1963
D-92209 Amberg
They are also available for download on the Siemens Industry Online Support
support.industry.siemens.com/cs/de/en/) web pages, keyword "Declaration of Conformity".
cULus approval
Underwriters Laboratories Inc., complying with
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
OR
80
WARNING
WARNING
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
(https://