Figure 3-3 Location For Cables - Siemens L-828 Manual

L-828 CCRs LC-Type (4, 7.5, and 10 kW/6.6 A/60 Hz)
Wiring Connections and
Startup
(contd.)

Figure 3-3 Location for Cables

1. Suggested Center for Load Cable (Conduit Cutout Center on 1.5-Inch Radius of Clearance)
2. Suggested Center for Radio Cable (Conduit Cutout Center on 1.5-Inch Radius of Clearance)
 2002 Siemens Airfield Solutions, Incorporated
All rights reserved
To install wiring, perform the following procedure:
1. Install all input and output cables. See Figure 3-3 for cable
location, Figures 3-4 and 3-5 for Remote control wiring,
Figure 3-6 for input/output wiring, and Figure 2-4 in the
Description section for the internal parts of the CCR.
96A0104B
Issued 6/02
Installation
Page 3-4