Installation; Installing The Device - Siemens SIMATIC ET 200SP Operating Instructions Manual

Installation

6.1

Installing the device

Requirements
The mounting rail is fitted.
Required tools
3 to 3.5 mm screwdriver (only to fix the strain relief and dismantle the BusAdapter)
Fixing strain relief
Fix the strain relief to the top and bottom of the left-hand side of the CPU 1515SP PC2 with the
supplied screws.
Installing the CPU 1515SP PC2
1. Install the CPU on the mounting rail.
2. Swivel the CPU back until you hear the mounting rail release click into place
3. To check that the CPU has correctly clicked into place, pull on the underside of the enclosure.
Figure 6-1
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
Installing the CPU 1515SP PC2
6
39