ACT Image Spot 50 CW
Strobe
Press the
button.
Press and hold the
Press and hold the
DMX Mode
Press the
button.
Press the
button for 2-channel mode or press the
Press and hold the
DMX Address
Press the
button.
Press the number buttons (0–9) to set the DMX address.
Press and hold the
Dimmer
Press the
button.
Press and hold the
Press and hold the
NOTE:
Make sure that the strobe speed is set to zero in order to use the dimmer.
Product code: 34060
button to increase the strobe speed.
button to decrease the strobe speed.
button until the output flashes to confirm the selection.
button until the output flashes to confirm the selection.
button to increase the brightness.
button to decrease the brightness.
button for 3-channel mode.
35