Table of Contents
Advertisement
ACT Image Spot 50 CW
Manual Mode
In this submenu you can manually adjust the dimmer, shutter, gobo index and gobo rotation.
Press the UP/DOWN buttons to select one of the following 4 options:
Press the ENTER button to confirm the selection and open the respective pop-up submenu where you
can adjust the values.
Press the UP/DOWN buttons to adjust the values. The adjustment ranges are as follows:
●
Dimmer: 0–255
●
Shutter: 0–255
●
Gobo Index: -128–127
●
Gobo Rotation: 0–255
Press the ENTER button to confirm the selection.
Display Settings
In this menu you can adjust the display settings of the device.
Press the UP/DOWN buttons to select one of the following 3 options:
●
Display Inverse:
●
Backlight Auto Off: The backlight of the OLED display will not turn off automatically after 60
●
Display Contrast:
Press the ENTER button to confirm the selection and open the pop-up submenu where you can
adjust the settings.
Press the UP/DOWN buttons to select the desired setting.
Press the ENTER button to confirm the selection.
Fixture Test
In this menu you can perform an auto test of the device's parameters.
Press the ENTER button to begin the auto test.
Product code: 34060
The OLED display will be rotated by 180° (NO/YES)
seconds of inactivity (NO/YES)
The adjustment range is between 0 and 30 (from low to high contrast)
29
Advertisement
Table of Contents
