Table of Contents
Advertisement
ACT Image Spot 50 CW
Fixture Information
In this menu you can view the LED operating hours and the firmware version of the device.
Press the UP/DOWN buttons to select one of the following 2 options:
●
Fixture Use Time:
●
Firmware Version:
Press the ENTER button to confirm the selection and view the information.
Special Functions
In this menu you can reset the device's settings to the default factory settings.
Press the ENTER button to open the pop-up submenu for the factory settings:
Press the UP/DOWN buttons to choose between NO and YES. If you choose YES, the device's settings
will be reset to the default factory settings.
Press the ENTER button to confirm your choice.
Product code: 34060
Provides information about the total hours of operation of the LEDs
Shows the current firmware version
30
Advertisement
Table of Contents
