Dimming Curve Settings; Dmx Error; Settings Lock; Strobe Settings - SHOWTEC Spectral M400 IP67 Manual

Spectral M400 IP67

7.5. Dimming curve settings

01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired dimming curve out of the 4 available options:

7.6. DMX Error

With this menu, you can determine the device's behaviour in case of a DMX signal error.
01) Press the UP/DOWN buttons until the display shows
02) Press the UP/DOWN buttons to toggle between the 2 options:
03) If the display shows
04) If the display shows
ensure undisrupted performance.

7.7. Settings Lock

With this menu you can determine whether Settings menu is locked or unlocked.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose ON or OFF.
04) If the display shows ON, you will need to insert the password (press UP>DOWN>UP>DOWN and press
the ENTER button) to enter Settings menu.

7.8. Strobe Settings

With this menu you can choose the desired strobe mode.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following 2 options:
04) If you have chosen
following DMX channel modes/personalities: TOUR, AR1.S and TR16.
Ordercode: 43534
Blackout
DMX data save
, the Spectral will black the output out, in case of a DMX signal error.
, the Spectral will fall back on the last working DMX signal, which will
Classic strobe
Special strobe
, strobe will be active only if you operate the device in one of the
.
.
.
.
19