Table of Contents
Advertisement
Zelzah
- Multidimentional Phaser
Power Up Modes – Bypass Mode
Setting Zelzah to Buffered Bypass mode preserves the high frequency
response of your guitar signal through your pedal chain and long cable
runs.
Press and hold the ON (6-STAGE) footswitch while connecting
1
power to the pedal. Once both LEDs flash, release the footswitch.
Turn the SPEED (6-STAGE) knob to select True Bypass or Buffered
2
Bypass. The ON (6-STAGE) LED will change color to indicate the
current status as the knob is turned.
True Bypass:
Buffered Bypass:
Press either footswitch to store the Bypass mode and begin
3
using Zelzah.
NOTE: Bypass mode is persistent across power cycles and is not
saved per preset.
SWEEP
classic
barber
env
SPEED
MIX
DEPTH
multidimensional phaser
GREEN
(default)
RED
RESONANCE
o
mild
strong
SPEED
phase
time
VOICE
DEPTH
pg 14
Advertisement
Table of Contents
