Table of Contents
Advertisement
External Control
Favorite Switch Setup and Compare Mode
Connect MiniSwitch or other external latching footswitch to store and
recall your Favorite setting�
NOTE: Your Strymon MiniSwitch's internal jumper switch must be set to the
factory-default FAV/BOOST Mode setting for Favorite Switch functionality�
If you've changed the setting of this jumper switch, you'll need to change it
back to FAV/BOOST Mode—see
1
Configure the EXP/MIDI jack for Favorite Mode� (See
more info�)
2
Connect your MiniSwitch (or, optionally, an external latching switch
with a TRS cable) to the EXP/MIDI jack�
3
Dial in your desired sound�
4
To save your sound as the new Favorite setting, press and hold the
UltraViolet footswitch for at least 2 seconds, until the LED blinks
GREEN� Then, press and hold the UltraViolet footswitch until the LED
BLUE
lights
Step on the external footswitch to toggle between your current and
Favorite settings on UltraViolet� Make sure to dial in a different
sound for the non-Favorite setting to hear the difference between
the two settings�
page
mono
mono
IN
OUT
to save the Favorite setting�
14�
stereo
USB
stereo
EXP/MIDI
9VDC
OR
page 9
for
pg 12
Advertisement
Table of Contents
